User manual

5
Power and extension Cords
• Do not allow anything to rest on the power cord.
• Do not locate this product where persons will walk on the cord.
• Use the proper power cord with correct attachment plug type. If the power source is 120V AC,
• use a power cord that has UL and C-UL approvals. If the power source is a 240V AC supply, use the
tandem (T blade) type attachment plug with ground conductor power cord that meets the respective
European country safety regulations, such as VDE for Germany.
• Do not overload wall outlets or power cords. Ensure that the total of all units plugged into the
wall outlet does not exceed 10 amperes.
• Ensure that the total ampere ratings on all units plugged into the extension cord is not above the
cord’s rating.
• If the power supply cord, which came with your monitor, is to be connected to the PC instead of
the wall outlet, this equipment is to be used with UL/TUV approved computer with receptacle
Rated 100-240V AC, 50/60 HZ,1.0A(minimum)
Environment
• Place the monitor on the flat and leveled surface.
• Place the monitor in a will-ventilated place.
• Keep the monitor away from: Overly hot, cold or humid place, place directly under sunlight, dusty
surroundings equipment that generates strong magnetic fields.
------------------------ Control Function II
LCD CONTROL
Power switch
Pressing this button turns the display system power on or off.
Menu/Select
Pressing this button pops up the OSD menus on the screen and used to select the OSD
control options on the screen.
+/Up
This button is used to adjust the increasing Value of selected OSD control Option and
Volume select quickly when have Audio in function / Selected OSD control option
-/Down
This button is used to adjust the decrease Value selected OSD control option and
Volume adjust function quickly when have Audio function. / Selected OSD control option
OSD CONTROL
AUTO ADJUST: Automatically size, centers direction and fine tunes Video signal to eliminate “ noise”
and direction.