U Command Console USER MANUAL Model: NS-1UCABCONS15 & NS-1UCABCONS17 www.newstar.
------------------------ Menu I. Introduction Product Description Page. 3 Package Contents Product Features Page. 3 Page. 4 Cleaning Precautions Page. 4 Page. 4 II. Control Function LCD Control Page. 5 OSD Control Keyboard & Mouse Page. 5 Page. 7 III. Inputs Diagram Inputs Page. 9 IV. Product Specification Product Specification Display Mode Page. 9 Page. 10 V. Service Information Page.
------------------------ Introduction I Product Description According to drastic increasing amount for Industrial Computer application in IT field, Adopt single unit controlling operation system to save space, decreasing cost & increasing working efficiency has become top priority and emergency. Following by this concept, NewStar’s 1U slim industrial monitor keyboard, the NS-1UCABCONS15 and NS-1UCABCON17 1U KVM drawer, is the solution for compacting more computing power into limited space.
Product Features • High contrast color TFT LCD display support resolution up to XGA 1280X1024 • Compatible with IBM VGA, VESA, SXGA and Macintosh standards. • 105 keys slim keyboard & touch pad mouse Cleaning • Gently wipe screen with a clean camel hair lens brush, or a soft, clean, lint-free cloth. • This removes dust and other articles that can scratch the screen. • Do not apply pressure to the screen surface when wiping it clean.
Power and extension Cords • Do not allow anything to rest on the power cord. • Do not locate this product where persons will walk on the cord. • Use the proper power cord with correct attachment plug type. If the power source is 120V AC, • use a power cord that has UL and C-UL approvals. If the power source is a 240V AC supply, use the tandem (T blade) type attachment plug with ground conductor power cord that meets the respective European country safety regulations, such as VDE for Germany.
BRIGHTNESS: Adjusts back ground black level of the screen image. CONTRAST: Adjusts for ground white level of the screen image. SHARPNESS: Adjusts the clarity and focus of the screen images. H. POSITION: Moves the screen image left or right. V. POSITION: Moves the screen up or down. CLOCK: Adjusts image distortion appearing as vertical bars or “noise” On the screen . PHASE: Adjusts image distortion appearing as horizontal “noise” on the screen.
Keyboard data output When the keyboard is ready to send data to the system, it first checks clock and data lines. If either one is in the low state, data is stored in the keyboard buffer. If both are in the high state, keyboard starts clocking data out. Data will be valid before the trailing edge and after the leading edge of the clock pulse. During the transmission the keyboard checks the clock line at least every 60 microseconds .
about the left and right “mouse” buttons. Field Size (bits) Range Meaning X 8 127 Amount of horizontal finger motion Y 8 127 Amount of vertical finger motion Left 1 0 or 1 State of left physical button or tap/drag gesture Right 1 0 or 1 State of right physical button Because the Relative packet is designed to be compatible with the existing mouse protocol, the exact contents of the Relative packet vary from one protocol to another. See the later sections of this Guide for details.
DATA, are bidirectional “open-collector” signals; they are normally held at a high (+5V) level by a 5–10K pull-up resistor on the host, but either the host or the Touchpad device can pull them low at any time. When the port is idle, both signal wires are floating high. The host can inhibit the device at any time by holding CLK low. Note that neither side ever actively pulls CLK or DATA high; to output a logic 1, the wire is left un-driven and allowed to float high.
------------------------ Product Specification IV SEPC \ L PC LCD Display Active matrix TFT LCD panel Pixel pitch □ 15”0.297(H)x0.297(w)mm □ 17”0.264(H) x 0.264(W) mm □ 15” 1024 x 768 XGA □ 17”1280 x 1024 SXGA Dimensions □ 15”439(W) x 554(D) x 44(H)mm □ 17”440(W) x 513(D) x 44(H) mm Packing □ 15”562(L) x 558(W) x 174(H)mm □ 17”630(L) x 562(W) x 165(H) mm Max. Resolution Dimensions Control Ratio 350:1 Brightness 250 cd/m2 Response Time 15ms Display Color 16.
4 640*480 VESA72 37.861 72.809 ∗ ∗ 5 640*480 VESA75 37.500 75.000 ∗ ∗ 6 720*400 VGA 31.469 70.087 ∗ ∗ 7 800*600 SVGA 35.156 56.250 ∗ ∗ 8 800*600 SVGA 37.879 60.317 ∗ ∗ 9 800*600 VESA72 48.077 72.188 ∗ ∗ 10 800*600 VESA75 46.875 75.000 ∗ ∗ 11 1024*768 VESA60 48.363 60.004 ∗ ∗ 12 1024*768 VESA70 56.476 70.069 ∗ ∗ 13 1024*768 VESA75 60.023 75.029 ∗ ∗ 14 1280*1024 1280 - 60 63.750 59.747 ∗ 15 1280*1024 1280 - 75 79.976 75.
