ANUKI QUICK GUIDE WIRELESS ANC EARBUDS
ANUKI W IRELESS ANC E ARBUDS operation function Touch part Power on: light touch 5 seconds Power off: light touch 5 seconds Next song: Double touch the right earphone Previous song: Double touch the left earphone Volume up: Triple touch the right earphone Volume down: Triple touch the left earphone Answer the call: Light touch any side Reject the call: Light touch 2 second any side Vent Indicator light Warning Chargin indicator light 1. Please do not take the earbuds apart and remodel.
ANUKI W IRELESS ANC E ARBUDS Charging Dual earphone mode Earphone charging Method one When the earphone keeps flashing green light, it means battery low and will power off soon. Please put the earphones into the charge case, it automatically turn off and charging.
ANUKI W IRELESS ANC E ARBUDS How to turn on noise reduction / transparency mode Transparent mode When the headset is turned on or playing music, long press left and right about 2s on either side of the earphone, you hear a beep at the same time.
ANUKI W IRELESS ANC E ARBUDS Reset Bluetooth earphone Put the earphone into charging case to close. Take it out after 3-5s, it will automatically re-pair! NOTE If there is another available paired device nearby, ANUKI will automatically connect to it without initiating the re-pairing process. About Signal 1. 2. 3. 4. Please notice the wearing method, do not cover the earphone by ear to prevent interruption of signal.
ANUKI W I RE L E S S A NC E ARB U D S
