Product Manual
Page 18 of 21
Draft 1.1
Excess gel should be wiped off after each examination. Unit should be cleaned with a damp water
or alcohol based wipe. Mild soap or detergent can be used. In particular pay attention to any
surface openings on the unit including, but not limited to, the speaker grill, the battery
compartment, the audio output, and the parting line between the front and back shell.
Practitioners should wash hands and change gloves after every exam. Please follow local and
hospital guidelines for cleaning and disinfection policies.
To disinfect unit, use an isopropyl alcohol wipe or spray, such as Parkers Labs Protex® and follow
the manufacturer’s instructions.
Store unit in a clean area free from dust and debris in an indoor environment.
If storing the unit for a prolonged period of 90 days or longer without use, please remove the
batteries prior to storage.
Periodically
Inspect the unit for signs or cracks or breaks in the surface housing. If any sign of cracking or
damage is evident, use of the unit should be discontinued. Please contact Newman Medical for
service.
Battery Replacement
WARNING: Replace rechargeable batteries only with approved rechargeable batteries. Please
call customer service or visit our website for further information.
WARNING: The DigiDop uses AA batteries. Do not attempt to use any other size batteries in the
unit.
Open the battery compartment by sliding the battery compartment door to the side. Remove the
drained batteries by pulling one of batteries out of the unit from the positive (button) end of the
battery.
Replace the batteries by paying close attention to the polarity indicators on the battery and the
polarity indicators on the battery door. Align the batteries according to the symbols located in the
battery compartment.
Please note: If the batteries have been incorrectly inserted, the DigiDop will not work, but will
NOT be damaged. Please re-insert the batteries correctly.
Chapter 9 – Specifications
Level of Protection against electrical shock
Type B Applied Part; Class II Equipment
Designed to meet the following standards:
IEC60601-1, IEC60601-2, IEC60601-2-37
SimpleABI System
Height (inclusive) 107 cm (42 inches)
Weight (inclusive) 5.5 kgs (12 pounds)
Transport/Storage Temperature -20-50C (-4-122F)
Transport/Storage Humidity 5%-90%, non-condensing
Battery Life 10 hours
DigiDop
Dimensions-imperial (h x w x d) 6” x 2.5” x 1.25”
Weight (with batteries) 370 grams (13 ounces)
Operating Temperature 10–40C (50-104F)
Operating Humidity 30%-75%
Transport/Storage Temperature -20-50C (-4-122F)