Product Manual

Page 8 of 21
Draft 1.1
Press and hold Inflate on the Cuff Link remote and inflate the cuff until you no longer
hear the signal, and continue for an additional 20 mmHg. Release the Inflate button
and the cuff will automatically start to slowly deflate. When you hear the Doppler signal
return press the Pressure button and it will be stored on the screen. Press the Dump
button.
Leg Pressures and waveforms: Press Next on the remote and the system will move
to the Dorsalis Pedis (DP) site. Take an ankle pressure using the Doppler probe on the
dorsalis pedis artery on top of the foot. The DP is often hard to find; be sure not to
press too hard as it is over boney structures and relatively easy to occlude. Inflate the
cuff to occlude the artery in the same manner you did on the arm. (Press Inflate,
press Pressure, press Dump). Now press Next and place the Doppler probe on the
posterior tibial (PT) artery behind the inside ankle bone. Obtain the pressure by again
pressing Inflate, then Pressure when the sound returns, and then Dump.