User's Guide

8
Volume button : Press volume button to adjust volume level low, middle, and high
Led # 1 (Low level 78dB), LED#2 (Middle level 85dB), and LED#3
(High level 104dB) at 0.3 meter distance.
Press volume button for 3 seconds to switch silence.
Power Status LED : Illuminates green continuously after
power is applied to the system
Range Indications : Illuminates to give operator a distance
zone to the closest detected object.
LED’s operate from the left to right,
with a closer object resulting in more LED’s illuminated.
● Display units Technical Specification
Dim Button : Press Dim button to adjust LED (2 steps)
Press Dim button to verify the current mode for 3 seconds.
(LED 1 is less bright and LED 2 is the most bright)
Factory Reset : Press Volume button before turn on system.
You can find that LED 1 ~ 3 are flashing sequentially.
(1)
Detection Zone 5 Zones
Speaker 3 x different volume level to be selected
Operating Temp. -30°C ~ +70°C
Cable Length 0.7 Meter
Connector 4P Screw Lock type
Housing Material Polycarbonate
Dimension 20(H) x 65(L) x 54(D) mm
Weight 220g with Bracket