User manual

Part 2: System Requirements & Installation

System Requirements

Mac®

Hardware: Intel-based Mac with available PCIe 2.0 or 1.0 slot* or Thunderbolt equipped Mac utilizing a

Thunderbolt PCIe expansion unit.

Operating System: Mac OS X 10.6 and later

Hardware: Any computer with available PCIe 2.0 or 1.0 slot*

Operating System: Windows® Vista/Server 2008 and later

Hardware Installation

Before Installing the MAXPower RAID eSATA 6G-4e card...

• Make sure computer is turned o and unplugged from its power source

• Take appropriate electrostatic discharge precautions:

Step 1 Open the computer systems chassis and locate an unused PCIe 2.0 or 1.0 slot (x4, x8,

or x16).

Step 2 Remove the PCI slot cover.

Step 3 Gently insert the MAXPower card into the PCIe slot and secure the bracket to the

computer chassis.

Step 4 After installing the MAXPower card attach any eSATA storage devices to the card and

start your computer.

Step 5 Once you have installed the MAXPower card into your computer, start your

computer and insert the Driver & Software Installation Disc to install the necessary

drivers for your computer operating system.

Page 4

Your computer is a static-sensitive device. It is susceptible to invisible damage if

not protected during installation.

We recommend proper grounding by using a grounding strap. Make sure to work

in a clean and static-free area, and avoid wearing clothing that retains static

charges.

For more information, please visit:

http://www.newertech.com/static

*PCIe x4, x8, or x16 slot is required

Newer Technology MAXPower RAID eSATA 6G-4e