User manual
SHI (Storage Health Inspector)
The Newer Technology Web Manager has a built-in health monitoring system to allow for monitoring of
drive characteristics and S.M.A.R.T status attributes. To access, click on the “SHI” menu item.
Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.) is a monitoring system built into drives to monitor dierent
health attributes to assist in warning of potential problems before catastrophic failure can occur. To view the S.M.A.R.T
status attributes of an attached drive, click on “SMART” to expand the attributes for viewing.
Page 14
Within the SHI section of the Web Manager, you can also set the temperature warning threshold for attached drives. Certain
drives have dierent maximum operating temperatures, so always check your drive’s specications before changing the
threshold setting. If a temperature exceeds the threshold, it will turn from green to red.
SHI will also display the number of bad sectors
found and repaired. Having a small number
is acceptable, but if the number continually
grows or the number turns red, it is strongly
recommended to replace the drive.
Newer Technology MAXPower RAID eSATA 6G-4e