User guide
Chapter 2 - LCD Display
Newer Technology Guardian MAXimus mini
GMAXmini
Starting...
GMAXmini
MAXProtect RAID1
GMAXmini
MAXPerform RAID0
LEFT button cycles through menus and options.
RIGHT button enters menus and selects options.
System
Information
Drive
Information
Settings
Enter>
Serial Number
0123456789ABC
Firmware Version
0123456789ABC
I/O Status
Interface: xxxxxx
>2TB Enabled
Alarm ON
RAID Setup: HW
Capacity: xxxxGB
Drv1: xxxxxxxxxx
S/N: xxxxxxxxxx
Drv1 Size: xxxGB
Temperature: xxC
Drv2: xxxxxxxxxx
S/N: xxxxxxxxxx
Drv2 Size: xxxGB
Temperature: xxC
>2TB Volume Mode
Disabled Enter>
>2TB Volume Mode
Enter>Enabled
Select >2TB Mode
Set>Enabled
Select >2TB Mode
Set>Disabled
Exit
OK>
Confirm Settings
OK>
GMAXmini
Starting...
RAID Mode Setup
Enter>
RAID 1
RAID Mode Setup
Enter>
RAID 0
Select RAID Mode
Set>
RAID 0 >1
-
Select RAID Mode
Set>
RAID 1 >0
-
Are you sure?
OK>
Erase all data?
OK>
Restarting now...
RAID Mode: 0
Capacity: xxxxGB
RAID Mode: 1
Capacity: xxxxGB
RAID 0 >1
<Abort
-
OK>
RAID 1 >0
<Abort
-
OK>
GMAXmini
MAXProtect RAID1
GMAXmini
MAXPerform RAID0
Alarm Setup
Enter>OFF
Alarm Setup
Enter>ON
Set/Mute Alarm
Set>ON
Set/Mute Alarm
Set>OFF
Exit
OK>
Backlight Setup
Enter>ON
Backlight Setup
Enter>OFF
Backlight Setup
Enter>1min
Backlight Setup
Enter>3min
Backlight Setup
Enter>5min
Exit
OK>
Set Backlight
Set>ON
Set Backlight
Set>OFF
Set Backlight
Set>1min
Set Backlight
Set>3min
Set Backlight
Set>5min
Exit Settings
OK>
Screen showing the new RAID mode
and capacity will appear for a few seconds...
• Click the LEFT button to ABORT the mode switching (unit will start up in previous RAID mode).
• Click the RIGHT button to CONFIRM the mode switching (unit will enter the new RAID mode).
The Newer Technology Guardian MAXimus mini utilizes an LCD display to congure
many of it’s functions. use the following diagram to navigate the menu system.