Operation Manual

CONTENTS
a. Warnings
b. Precautions
1. Overview
i. Application and Advantages of STARGATE- M
ii. Features
1. Specifications
2. Construction
3. Operating Instructions
4. Care and Maintenance
5. Troubleshooting
6. Warranty
7. Customer support
8. Acceptance Certificate
THANK YOU FOR PURCHASING STARGATE M NIGHT
VISION DEVICE. PLEASE DEMAND TO CHECK THE DEVICE
FOR PROPER OPERATION WHEN BUYING IT. PLEASE READ
ALL THE INSTRUCTIONS CAREFULLY BEFORE USING.
1. OVERVIEW
Stargate M Night Vision scope is a sophisticated optical-electronic
observation device designed to allow observations of personnel and
orientation in nighttime conditions. The unit is utilizing an image
intensifier tube, which amplifies available moonlight, starlight or man-
made light. The viewer was designed to be easy to use, convenient to
carry and provide many years of operation. The Stargate M utilizes
piezocrystals as a source of high voltage power for the image intensifier
tube. By means of a special lever mechanism piezocrystals are exposed to
pressure and high voltage is produced on the piezocrystals, which is
supplied to the image intensifier tube. This enables to conduct
surveillance in the dark, by the actuating handle being kept pressed down
continuously.
The above method of power supply to the image intensifier tube
eliminates the use of batteries and high voltage converters. This
development, besides making the product more affordable, enhances the
reliability of night vision equipment and extends its service time.
NEWCON OPTIK may replace any product that has been discontinued or
is out of stock, by another current product of comparable value and
function.
NEWCON OPTIK DISCLAIMS ANY WARRANTIES,
EXPRESS OR IMPLIED, WHETHER OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR USE, EXCEPT AS EXPRESSLY SET
FORTH HEREIN.
THE SOLE OBLIGATION OF NEWCON UNDER THIS LIMITED
WARRANTY SHALL BE TO REPAIR OR REPLACE THE COVERED
PRODUCT, IN ACCORDANCE WITH THE TERMS SET FORTH
HEREIN. NEWCON EXPRESSLY DISCLAIMS ANY LOST
PROFITS, GENERAL, AND SPECIAL, INDIRECT OR
CONSEQUENTIAL DAMAGES WHICH MAY RESULT FROM
BREACH OF ANY WARRANTY, OR ARISING OUT OF THE USE
OR INABILITY TO USE ANY NEWCON PRODUCT.
9. CUSTOMER SUPPORT
Should you experience any difficulties with your Newcon OPTIK
product, consult the enclosed manual. If the problem remains unresolved,
contact our customer support department at [phone] or
toll free 1-877-368-6666. Our operating hours are
9am-5pm Monday - Friday, standard East time.
At no time should equipment be sent back to Newcon without
following the instructions of our technical support department.
Newcon accepts no responsibility for unauthorized returns.
To locate the NEWCON Authorized Dealer call:
Tel: [phone] Fax: [phone]
E-mail: [e-mail]
Internet: www.newcon-optik.com
The defective products should be shipped to:
In USA: 3310 Prospect Ave. Cleveland, OH 44115 USA
In Canada: 1183 Finch Ave. W., Suite 302, Toronto, ON
M3J 2G2 CANADA