Operation Manual NIGHT VISION MONOCULAR NEWCON 2001© Printed in Canada PHANTOM 20 In USA: 3310 Prospect Ave. Cleveland, OH 44115 In Canada: 1183 Finch Ave. W., Suite 302, Toronto, ON. M3J 2G2 Canada Tel: (416) 663-6963 Fax: (416) 663-9065 Email: NEWCONSALES@NEWCON-OPTIK.COM Internet: www.newcon-optik.
IMPORTANT INFORMATION Read prior to activation You have just purchased a complicated electronic device. To operate it properly, please read this manual carefully. Here are some common Precautions that must be noted. • NEVER expose the opened objective lens of an active unit in daylight. At daytime objective lens must be covered by caps. There is a tiny hole in the cap to provide enough light for daytime operation. It is allowed to turn on the unit at daytime, but caps must cover the lenses.
CONTENTS 9. ACCEPTANCE CERTIFICATE NIGHT VISION DEVICE PHANTOM Serial Number 20 _______________________________ Corresponds to technical conditions ADSH 3.807.020 TU and is admitted for use. Date of production -___________________ Place for seal Quality inspector ____________________ (Signature) 1. Overview i) Application and Features of Phantom 20 ii) Warning iii) Precautions 2. Components 3. Specifications 4. Construction 5. Operating Instructions 5.1 Pre-starting procedures 5.
1. OVERVIEW Phantom 20 Night Vision monocular is a sophisticated opticoelectronic observation device designed to allow observations of personnel and orientation in nighttime conditions. The unit is utilizing an image intensifier, which amplifies available moonlight, starlight or man-made light. Waterproof, lightweight and compact this advanced system is one of the most affordable systems on the market.
7. WARRANTY NEWCON OPTIK warrants this product against defects in material and workmanship for one year from the date of the original date of consumer's purchase, but no more than 18 months from the date of delivery being indicated and stamped on the acceptance certificate purchase. Should your NEWCON product prove defective during this period, please bring the product securely packaged in its original container or an equivalent, along with proof of the date of original purchase, to your NEWCON Dealer.
• Keep away from heating appliances and central heating. • Make sure to switch off the unit during periods of non-operation and when storing the device for long period of time. • Do not apply superfluous efforts at work with lens assembly, agile elements and thread connections.
AT INSUFFICIENT AMBIENT ILLUMINATION Activate switch (4) for switching on the device. Press button (5) for switching on IR illuminator. Direct the device on the object to be viewed. Note: The I/R turns off, if not being pressed on. 5.4. Using interchangeable lenses. The unit is equipped with PENTAX “screw type” removable lens F 50/1.2, M 42x1. It will accept most Pentax screw type lenses, or using proper adapters, many other lenses.
4. CONSTRUCTION 3 5. 4 5 1 2 8 7 9 6 10 1- Body 2- Lens Focusing Ring 3- Eyepiece 4- Switch Button for the Scope 5- IR Illuminator Switch 6- IR Illuminator 7- Battery House Cover 8- Lens Cover 9- Carrying Strap 10- Low battery indicator 8 OPERATION INSTRUCTIONS WARNING! NEVER OPERATE YOUR NIGHT VISION DEVICE IN DAYLIGHT AREAS WITHOUT THE LENS COVER ON! NEVER DIRECT THE LENS IN THE DIRECTION OF BRIGHT LIGHT! 5.1 Pre-starting procedures. 1. Unpack the device.
