Operation Manual

Precautions
NS-156 is a sophisticated precise optical instrument equipped with
electronics. Therefore, it should be handled with due care.
Keep your device away from direct sunlight, impacts, dust,
moisture, and sudden changes of temperatures.
Do not touch the optical surfaces with fingers. Doing so may
damage the anti-reflection coating.
Cleaning of optical surfaces is possible only with professional
camera lens cleaning supplies.
To clean the exterior of the device, use only a soft clean cloth.
Do not take the cover off the lens if not necessary.
Keep away from heating appliances and central heating.
Make sure to switch off the unit during periods of non-operation
and when storing the device for long period of time.
Do not apply superfluous efforts at work with lens assembly, agile
elements and thread connections.
Due to considerable optical magnification of the eyepiece some
small structures inside the tube coating in the form of dark and/or
white points may be seen in the field of view, which does not
affect the serviceability of the device.
3. COMPONENTS
NS-156 is supplied with the following components:
NAME QUANTITY
NS-156 unit 1
Soft case 1
AA Battery (optional) 2
Weaver weapon mount assembly 1
Lens cap 1
AP-9 I/R Illuminator 1
Manual 1
Warranty Registration Card 1
8. CARE AND MAINTENANCE
Maintenance includes only replacing the batteries and cleaning of
parts if necessary.
The batteries are to be replaced after their discharge; if there is no
lit screen after switching on the device or it is very dim; or if a
leakage of batteries has been discovered.
The dirty parts are to be cleaned with a soft cloth or cotton wool.
In case of electrolyte leakage the battery compartment must be
carefully cleaned. Alkaline batteries are therefore recommended
When cleaning optical parts of the lens and eyepiece please to
remove solid dust particles with a jet of air first. Then after giving
a sigh out on the surface clean it with a soft cloth making circle
moves in the direction from the center to the rim.