OPERATION MANUAL NIGHT VISION SCOPE MB-3 Newcon International ltd. © 1998-2003 Printed in Canada In USA : 3310 Prospect Ave. Cleveland, OH 44115 In Canada : 1183 Finch Ave. W., Suite 302, Toronto, ON. M3J 2G2 Canada Tel: (416) 663-6963 Fax: (416) 663-9065 Email: NEWCONSALES@NEWCON-OPTIK.COM Internet: www.newcon-optik.
ATTENTION! IMPORTANT INFORMATION Read prior to activation You have just purchased a complicated electronic device. To operate it properly, please read this manual carefully. Here are some common Precautions that must be noted. • Image quality of the object, which is being observed when an image intensifier is functioning, depends mainly upon operating characters of this image intensifier.
9. ACCEPTANCE CERTIFICATE NIGHT VISION DEVICE MB-3 Serial Number _______________________________ Model MB-3_____________________ corresponds to technical conditions ADSH 3.807.020 TU and is admitted for use.
CONTENTS 1. Overview i) Application and Features of MB-3 ii) Warning iii) Precautions 2. Components 3. Specifications 4. Construction 5. Operating Instructions 5.1 Pre-starting procedures 5.2 Testing of operation 5.3 Operation at night 6. Troubleshooting 7. Warranty 8. Customer support 9. Acceptance Certificate THANK YOU FOR PURCHASING MB-3 NIGHT VISION DEVICE. PLEASE DEMAND TO CHECK THE DEVICE FOR PROPER OPERATION WHEN BUYING IT. PLEASE READ ALL THE INSTRUCTIONS CAREFULLY BEFORE USING. 1.
7. WARRANTY Some of the typical activities where the MB-2 will be useful: boating, search and rescue, law enforcement, wildlife observation, security. NEWCON OPTIK warrants this product against defects in material and Features workmanship for one year from the date of the original date of consumer's purchase, but no more than 18 months from the date of delivery being indicated and stamped on the acceptance certificate purchase.
Warning! After transportation or keeping the device at temperature lower than -25°C (-13°F), the device must be warmed up to ambient temperature, from -20°C (-4°F) to +40°C (104°F) during 2-3 hours. Precaution MB-3 is a precision optical instrument equipped with electronics. Therefore, it should be handled with due care. • Keep your device away from direct sunlight, impacts, dust, moisture, and sudden changes of temperatures. • Do not touch the optical surfaces with fingers.
2. COMPONENTS 5.3. Operation at night MB-3 is supplied with the following components: AT MOON LIGHT Take off the lens cover (8). Turn on the device using switch (4). Turning the eye-piece focusing lever (3) adjust to achieve the most clear image on the screen. Then obtain the most clear-cut image of the object focusing with ring(2) Repeat the steps of focusing if necessary. AT INSUFFICIENT AMBIENT ILLUMINATION Activate switch (4) for switching on the device.
4. CONSTRUCTION 5. OPERATION INSTRUCTIONS 3 WARNING! 4, 5 NEVER OPERATE YOUR NIGHT VISION DEVICE IN DAYLIGHT AREAS WITHOUT THE LENS COVER ON! NEVER DIRECT THE LENS IN THE DIRECTION OF BRIGHT LIGHT! 1 7 2 5.1 Pre-starting procedures. 1. Unpack the device. In order to replace the batteries unscrew battery house cover (7) and replace the batteries observing the polarity indicated; close cover (7).
