Operation Manual Spotter NC 20-60x80 Spotting Scope 105 Sparks Ave.
TABLE OF CONTENTS 1. INTRODUCTION....................................................1 2. SPECIFICATION ....................................................2 3. SPOTTER NC 20-60x80..........................................3 4. DELIVERY SET ......................................................4 5. OPERATION INSTRUCTIONS..............................5 6. STARTING OBSERVATION .................................6 7. CARE FOR YOUR SPOTTING SCOPE.................7 8. WARRANTY ......................................
1. INTRODUCTION Congratulations on your purchase of a Spotter NC 2060x80 spotting scope. The Spotter is an amazing scope designed for hunting, shooting, wildlife observation and other outdoor activities. OPTICAL QUALITY The Spotter will impress you with its optical excellence, featuring Broadband fully multi-coated optics for bright, detailed images. CAUTION: Spotting scopes are not intended for looking at the sun, or any other intense light source.
2.
3.
4.
5. OPERATION INSTRUCTIONS SET UP AND MOUNTING 1) Spread the tripod legs (A) and set the tripod on a firm support. Loosen the adjustment screw (B) to place mounting platform (C) in horizontal position, then rotate the screw to lock mounting platform. 2) Position mounting shoe (D) of the spotting scope body on the platform (C) then tighten mounting screw (E) to firmly lock spotting scope body on the platform. 3) Remove protective lens cap (F) on the objective (G) lens.
6. STARTING OBSERVATION USAGE WITH FIXED POWER EYEPIECE 1. 2. Loosen the adjustment screw (H) and point your scope objective lens to the target you want to view. Adjust the focus knob (K) until you get the clear image from your eyepiece lens. USAGE WITH ZOOM EYEPIECE 1. 2. 3. 4. Loosen the adjustment screw (H) and point your scope objective lens to the target you want to view. Rotate the zoom ring (L) of the eyepiece to the lowest magnification.
7. CARE FOR YOUR SPOTTING SCOPE To clean the lenses, use a soft bristle brush to whisk off dust and dirt and then use soft cloth moisture with alcohol. Wipe lenses from center outward and avoid touching the lens, as fingerprints will smear the lens. To clean body parts, use a soft cloth with warm water and a mild soap to remove dirt. Do not dismantle the spotting scope or the eyepieces. If they need repair or adjustment, please contact the dealer in your country.
8. WARRANTY NEWCON warrants this product against defects in material and workmanship for one year from the date of the original purchase. Longer warranty is available, subject to the terms of the specific sales contract. Should your product prove to be defective during this period, please deliver the product securely packaged in its original container or an equivalent, along with the proof of the original purchase date.
9. CUSTOMER SUPPORT Should you experience any difficulties with your NEWCON OPTIK product, consult the enclosed manual. If the problem remains unresolved, contact our customer support department at (416) 663-6963 or toll free at 1877-368-6666. Our operating hours are 9am-5pm, Monday - Friday, Eastern Standard Time. At no time should equipment be sent back to Newcon without following the instructions of our technical support department. NEWCON OPTIK accepts no responsibility for unauthorized returns.
10. QUALITY CERTIFICATE Spotter NC 20-60x80 Complies with all technical specifications and has passed the inspection.
11
12
R1 – 5.
