- NEWCON OPTIK LONG RANGE LASER RANGE FINDER LRB 20000 OPERATION MANUAL

4. SUPPLIED ACCESSORIES
Description Designation Qty
Serial
No.
Remarks
Rangefinder
Tripod (optional)
Angular mount
(optional)
Rechargeable
battery
Fuse link VP1-1
1,0 A 250 V
Sealing ring
Framed lens
Membrane
Eye shield
Diaphragm
Pencil TM, M, CT, T
Wrench
Synthesized fiber
brush KXOOK No.
7
Coordinate converter
Cable
Cable
Cable
Cable
Cable
AEP 41.46.712
G 42.14.067
G 42.21.812
10D-0,55С-1
G 68.79.193-
02
G 44.21.885
AEP 75.48.092
G 47.92.131
AEP 73.54.031
AEP 87.61.505
G 42.41.211
AEP 48.44.037
AEP 48.44.038
AEP 48.44.039
AEP 48.44.040
AEP 48.44.120
1
1
1
2
5
2
1
2
2
1
1
1
1
1
1
1
1
1
1
- protection device 12, used to supply the rangefinder with
(27±2.7) V DC or 22-29 V from a vehicle electrical system,
or with 22-29 V or 12-14.5 V from external batteries;
- cable 14, used to couple the protection device to the
electrical system of a track-laying vehicle;
- cable 15, used to connect the protection device to external
rechargeable battery type 6CT70 (or analogous);
- cable 16, used to connect the protection device or charging
device to the electrical system of a wheeled truck;
- cable 17, used to couple the charging device to a mains of
220 V 50 Hz;
- cable 18, used to couple the protection device to external
battery type 21NКBN-3,5;
- pencil 3 and eraser 8, used while working with the map and
coordinate converter;
- coordinate converter 10, used for polar-to-rectangular
coordinate conversion, reference location of the observation
post and orientation of the range finder;
- sealing ring 4, used to seal battery section;
- eye shield 5, used to exclude incident light in the eyepiece;
- framed lens 6, used to contribute the angle reading
convenience and accuracy when operating the AI;
- membrane 19 to seal the MEASURE button assembly;
- cover 20, to protect the rangefinder against direct sun rays;
- cover 21, used to protect the rechargeable battery against
damages.