Instructions / Assembly

9
A Name You Can Trust
 Do not directly spray water on the surface of the product.
CLEANING THE WATER TANKS
To periodically clean the water tanks, follow the procedure described for
“Initial Cleaning” on page 6 of this manual. Hard water may cause mineral
deposits to build up on the interior of the hot water tank, resulting in a
decrease in heating capacity. To remove deposits, fill the hot water tank with
an aqueous solution of 2% citric acid and leave for two hours. Flush system
completely as described above. If the problem persists, contact your dealer or
Customer Service for assistance.
 If power supply cord on this device is damaged, it must be replaced with a
special power supply cord that is obtainable at the Service Center of our
company.
 If the water dispenser will go unused for more than a few days, it is
recommended that you unplug the unit, remove the water bottle, and
drain the unit completely.