User Manual

www.newair.com 10

INSTALLATION INSTRUCTIONS

• Heater must be installed by a qualified electrician.

• Place the heater on a firm, level ceiling surface. Install the heater on a strong

support system, such as strong wooden beams, metal rails, or etc.

• The hook on the strong support system you are using to hang the ceiling

heater must be able to take a weight 3 or 4 times that of the ceiling heater

itself.

• Attach hook A (see parts diagram) to a hook on the strong support system.

Or wrap hook A around the strong support system and clip hook A onto any

ring of the chain to adjust the height of the ceiling heater.

• Make sure the distance between the bottom of the ceiling heater to the

floor must be over 70 in (180cm).

• Plug the ceiling heater into a grounded 110-120V 50-60Hz 15A power outlet.

• Only operate the heater when it is in the upright position.

CLEARANCE REQUIREMENTS

• 9.84 in (25cm) from the side wall

• 19.64 in (50cm) from the ceiling

• Installation height above 70 in (180cm)