Instructions / Assembly

8
http://www.NewAir.com
BUTTON FUNCTIONS:




Raise the desired
temperatures.*
Lower the desired
temperature. *
Turn the light on
and off.
* The interior temperature can be adjusted in increments of 1 degree between
54° and 66°F (12° - 18°C).
To change the temperature readout to either Fahrenheit or Celsius,
simultaneously press and hold the UP and DOWN buttons for at least 3
seconds.
After turning on the cigar cooler, the LED display will show the ambient
temperature first, and then the internal cabinet temperature.
After you set the desired temperature, this set temperature will flash for 5
seconds on the display and then revert back to the internal cabinet
temperature.
CLEANING & MAINTENANCE
CLEANING YOUR COOLER
To clean your cooler:
 Unplug the cooler and remove anything inside.
 Wash the inside of the unit with a solution made of warm water and baking
soda solution (2 tablespoons of baking soda to one quart of water).
 Unscrew the water reservoir at the bottom of the unit and rinse with water.
 To clean the outside of the unit, use a mild detergent and warm water.
MOVING YOUR COOLER
To move your cooler:
 Remove anything stored inside.
 Securely tape down all loose parts located inside the unit.