Use and Care Manual
EN
www.newair.com 10
OPERATING INSTRUCTIONS
HOW TO USE THE BUTTONS ON THE DISPLAY PANEL
Turn the power on and off.
Raise the desired temperature.
Turn the light on and off.
Lower the desired temperature.
1. Press and hold for 3 seconds on control panel to turn on or turn off the fridge.
When turned off, the appliance will stop working and completely shut down.
2. Press button to turn on or turn off the light in both zones.
3. Press or buttons to adjust the temperature in increments of 1 degree.
4. Press both lower zone temperature buttons and hold for 3 seconds to
change temperature display from Celsius to Fahrenheit or vice versa.
WARNING SYSTEM
1. Door open alarm: When door has been open for over 5 minutes, door open alarm
will be on, beeping 3 times every 5 seconds and the LCD screen will display
icon. Press any key or close the door to stop the alarm.
2. Low temperature alarm: When inside temperature is below 35.6°F (2°C) for over 3
hours, it will beep to alarm and LCD screen will display . Press any key
to stop the beeping alarm.
3. High temperature alarm: When inside temperature is above 77°F (25°C) for over 6
hours, it will beep to alarm and LCD screen will display icon. Press any
key to stop the beeping alarm.