Use and Care Guide

FAULT CHECK LIST
The air conditioner does not run.
Ÿ Is the air conditioner plugged in?
Ÿ Is the power outlet functioning correctly?
Ÿ Is the full water tank indicator light flashing?
Ÿ Is the ambient room temperature lower than
the set temperature?
The unit does not produce enough
cooling.
Ÿ
Is the unit placed in direct sunlight? If so, close
any curtains or move the unit to a more
shaded area.
Ÿ Are too many windows or doors open?
Ÿ Are there too many people in the room?
Ÿ Are there additional heat sources in the room?
The unit does not cool at all.
Ÿ Is the filter dusty or dirty?
Ÿ Is the air inlet or air outlet blocked?
Ÿ Is the ambient room temperature lower than
the set temperature?
The unit is noisy.
Ÿ Is the machine positioned unevenly? Make
sure the air conditioner is positioned on an
even, solid surface.
The compressor does not work.
Ÿ It is possible the overheat protection of the
compressor is on. If so, wait for the
temperature to drop and then turn on the unit
again.
☆ NEVER TRY TO REPAIR OR DISMANTLE THE UNIT YOURSELF. UNAUTHORIZED REPAIRS CAN
VOID YOUR WARRANTY AND ENDANGER THE UNIT.