Use and Care Manual

7
Assembling the Dining Table
Tighten eight M6x70mm screws (10) through the holes along the edges of the frame.
5
Tighten two M6x20 screws (6) and 16mm washers (7) into the holes (A) on top surface
of the frame assembly.
For SS-Teak dining table: Insert two M6x20 screws (6) and 16mm washers (7) into the aligned
holes of the Joint and tighten them using two M6 lock nuts (9) and 16mm washers (7).
For Alum- Teak dining table: Insert two M6x25 screws (8) and 16mm washers (7) into the
aligned holes of the Joint and tighten them using two M6 lock nuts (9) and 16mm washers (7).
Refer to illustration A.
4
10
7
6
7
7
8
9
A
Alum-Teak
SS-Teak
A
A
A
A
6
7
7
6
9
A