Instructions / Assembly

61
1
DrillSide Panel
Saw
Ø4mm X 30mm
Chipboard Screws
W
Wall
W
2”
2”
Parts required
Identify the leftover space between the
cabinets and the wall.
Measure the space between the wall and
the cabinets.
Take the other 2” strip and attach it to the
wall aligned with the height of the cabinet
using a Ø4mm X 30mm chip board screws.
Cut the side panel into three pieces. One
with the measured width to cover the
space and two with a width of 2”.
Take one of the 2” strips and attach it
to the side panel of the cabinet using a
Ø4mmX 30mm chip board screws.
1
2 3
5 4
Installing the Filler piece