Instructions / Assembly

Table Of Contents
55
1
DrillCrown Moldings
SawMiter Box
Ø3.5mm X 35mm
Chipboard Screws
Parts required
Measure the length of cabinets on top to
cut a required length of Crown Moldings.
Cut the crown moldings to required
length with an angular cut of 45 degrees
at the edges.
Install Crown Moldings on top of the
cabinets.
Drill two pilot holes at each corner and
drill in the Ø3.5mm X35mm chipboard
screws into the pilot holes.
1
2
3
4
1
Parts required
1
2
3
4
L
L
L
Installing the Crown Moldings