Instructions / Assembly

Table Of Contents
53
1
Parts required
1
2
4
1
3
Installing the Wall Cabinet Side Panels
(Installed for the cabinets without under cabinet skirting)
Use a standard height side panel when
under cabinet skirt is not being installed.
Drill in four Ø4mm x30mm chip board screws at all corners by leaving a gap of 2” from the
edges to attach side panel.
Remove the C-Clamp and follow steps
1 and 2 to install side panels wherever
needed.
Drill
C - Clamps
Side Panels
Ø4mm X 30mm
Chipboard Screws