Instructions / Assembly

52
Pre -drill two pilot holes at 3/4” from
bottom and top aligned with the wall
studs using a 3/32” drill bit. Screw in
the cabinet to the wall stud using the
Ø6x70mm Lag screws provided.
9
Installing the Above Fridge Cabinet
2”
2”
2”2”
Adjust all 4 feet by rotating them to make
sure the cabinet is level.
Drill in four Ø4x30mm chip board screws
at all corners by leaving a gap of 2” from
the edges to attach cabinets together.
7
8
2”
2”
2”2”
Drill in four Ø4x30mm chip board screws
at all corners by leaving a gap of 2inches
from the edges to attach side panels.
5
Carefully lift the cabinet and move it next
to the wall cabinets according to the
layout.
6
Two or more people are
required to lift/move cabinets
into place.
Max. 3/4” adjustable
2”