Instructions / Assembly

45
Add shims to the bottom of the cabinet.
Using a level make sure the cabinet is
plumb vertically and horizontally from
the front to the back and left to right.
Use an exacto knife to cut the shims after
installing all the wall cabinets.
5 6
Wall cabinets can be adjusted vertically
by adjusting the screw noted B in the
image below. To fully seat the wall cabinet,
ensure screw A is tightened and the
cabinet is ush with the wall hanging
bracket.
7
Referencing your design layout, locate
the two wall hanging brackets on the
next cabinet and ensure they are fully
extended.
B
B
A
A
A
A
B
B
Wall Cabinets Installation
8
Fully extend all the wall hanging brackets
by rotating the screw “A“ counter
clockwise. Use the extended philips bit for
best results.
A
A
A