Instructions / Assembly

35
1
Drill
Ø4 mm X 30 mm
Chipboard Screws
L-Shaped
Filler Piece
Parts required
Take the L-shaped ller piece which comes
with the blind corner cabinet and identify
two pilot holes provided on the cabinet.
C-clamp the L - ller piece into position ensuring the top and bottom are ush with the
cabinet.
Take two Ø4mm X30mm chip board
screws from the hardware box and screw
the L-llet piece to the cabinet from the
inside using the pilot holes. Ensure not to
over screw.
1
2
3
Do not screw-in L-Panel from
the outside.
Corner Layout Installation
Note: When installing a corner layout, it is recommended to start the cabinets installation with blind
corner cabinet. Install the L - ller panel provided inside the blind corner cabinet before installing it to
the wall.
Blind Corner Cabinet - Filler Panel Installation