Instructions / Assembly

25
Installation of Drawer Front Panels
Push the top drawer front panel into the
top drawer and make sure the drawer
front connectors are locked into the
drawer properly.
Open the drawer and drill in two Ø4mm
X15mm screws through the holes on the
drawer stabilizer from the bottom.
3 4
Fix the dawer front connectors into the
holes at both ends of the panel. Tighten
the screws using a philips screwdriver.
2
Take the Top drawer front panel and x
the drawer stabilizer(36” Drawer only)
into two holes at the centre on back of the
panel.Tighten the screws using a philips
screwdriver.
1
Top Drawer
If you’ve purchased cabinets with doors/drawer front separately, you will be required to install
the drawer front connector onto the drawers.
Only for 36” Drawer