Instructions / Assembly

16
Installation Overview
The section gives you an overview of cabinets installation process. Refer to the corresponding
sections in this install guide for step by step process.
Remove doors and drawers of all the
cabinets and store in a safe area where
they cannot get damaged during
installation
Install leveling legs to all the base
cabinets. Make sure to install on the
correct side for single door cabinets.
Install the blindcorner cabinet, 9” oset
from the wall.
Install cabinet support rails to the wall.
Install all wall cabinets according to the
planned layout.
Install base cabinets according to the
planned layout.
Note: It is recommended to install all base cabinets rst. If you are installating a corner layout start
with the Blind Corner Cabinet.
Top Line for Wall Cabinets
(84” or 90” from the base
level line measured and
marked on page 9.)
Wall Studs
60mm (2.36”)