Instructions / Assembly

14
Room Preparation
• Using a carpenter’s level, check the walls for uneven spots. Wall unevenness can cause cabinets
to be misaligned resulting in racking or misalignment of the doors and drawer fronts. At the
point where these uneven spots interfere, high spots should be removed by scraping and
sanding o excess plaster or sheet rock. Low spots should be shimmed with pieces of wood
shims.
• Mark the outlines of all the cabinets on the wall to check actual cabinet dimensions against your
layout to conrm that the room design used will work.
• Mark down all plumbing and other utilities. Check that everything ts with the measurements
from your plan and your electricity, water, gas and ventilation connections are where you want
them to be.
36” Wall Cabinet
36” Sink Cabinet
24” Cabinet
18”
Base
Cabinet
24”
Glass Door
Wall Cabinet
Above
Microwave
Cabinet
24”
Wall Cabinet
Above
Fridge Cabinet
Pantry Cabinet
Corner
Wall
Cabinet
Blind
Corner
Cabinet
Stove
24”
3- Drawer
Cabinet
Fridge
Locate Wall Studs
Example of cabinets outlined on wall
• Use a stud nder to locate the wall studs. The wall studs are crucial to properly support the
weight of the cabinets.