Instructions / Assembly

12
Room Preparation
Before you begin
• Shut o all existing water, power and utility lines.
• Remove existing appliances (stove, oven, refrigeration, sink, and dishwasher). It is best to move
these out of the room for easier access to the work area while the remodeling is being done.
• Remove old cabinets and countertops.
• Remove any moldings from the walls where cabinets are to be installed.
B
B
B
B
C
D
A
E
Measuring and Marking your Space
It is very important to measure and understand your room space for planning your installation.
Use a tape measure and a pencil to measure and identify the following:
A. Height of the room from the oor to the ceiling.
B. Width of the room wall to wall / wall to door.
C. Height from the oor / Ceiling to any windows to ensure the cabinets t.
D. Location of any service points for plumbing,electrical and any other use.
E. Any other permanent xtures like pillars.
ATTENTION: NewAge recommends using a professional kitchen installer to prepare and install
kitchen cabinets.
NOTE: If you are unfamiliar or unsure of how to handle utility connections, have a qualied
professional perform these duties.