Installation Guide

48
Replacing Lightbulbs
CAUTION
• Disconnect Pizza Oven at power source before replacing light bulbs.
• The oil from your ngertips will reduce the life of the bulb. It is recommended to touch the bulb
as little as possible and to wipe the bulb with a cloth after handling with bare ngers.
To replace the halogen bulbs of your Pizza Oven you must rst remove the lens from the light
housing. To remove the lens from the housing, remove the Philips screw securing the housing in
place. Snap the lens out of the housing (including the metal bracket). Reach in using your ngers
only, grip the two outside edges of the light bulb, do not grip the top or bottom of the bulb, as it
might break. Insert the new bulb using your clean cloth and gently snap it into position.
Replace bulb by pushing straight into light
socket. Re-attach light cover, and
re-install housing repeating steps 2 and 3
in reverse order.
Carefully pull the housing out from Pizza
Oven, it will be attached by electrical
wire so do not pull hard. Remove the clip
holding the light cover to the main light.
housing.
4
2
13
1
With the light cover removed pull the
halogen bulb out from light socket.
Begin by unplugging the Pizza Oven from
the power supply. Remove the screw
holding the light housing to the Pizza
Oven using a #2 Phillips screwdriver.
A
100w/12V