Installation Guide
Table Of Contents
- NEWAGE PRODUCTS INC. OUTDOOR KITCHEN PLATINUM PIZZA OVEN MANUFACTURER WARRANTY
- Safe Operating Practices
- Parts Supplied
- Tools Needed
- Product Inspection
- Product Specifications
- Installing Pizza Oven on NewAge Cabinet & Carts
- Installing Pizza Oven on custom built cabinet
- Assembling the Pizza Oven
- Leak Testing Instructions
- Fixing a Gas Leak
- Connection to AC
- Optional Accessories
- Pre-Operating Checklist
- Operating the Pizza Oven
- Proper Burner Position and Operation
- Pizza Oven Maintenance and Cleaning
- Troubleshooting
- Electrical Wiring Diagram
- Exploded View and Spare Parts
- GARANTIE DU FABRICANT DU FOUR À PIZZA PLATINUM OUTDOOR KITCHEN
- Pratiques d’exploitation sûres
- Pièces fournies
- Outils requis
- Inspection du produit
- Spécifications du produit
- Installation d’un four à pizza sur un meuble et un chariot NewAge
- Installation d’un four à pizza sur un meuble construit sur mesure
- Assemblage du four à pizza
- Instructions de Test d’Étanchéité
- Réparer une fuite de Gaz
- Connexion au CA
- Accessoires optionnels
- Liste de contrôle préfonctionnement
- Liste de contrôle préfonctionnement
- Utilisation du four à pizza
- Position et fonctionnement corrects du brûleur
- Entretien et nettoyage du four à pizza
- Remplacement des ampoules
- Dépannage
- Schéma de câblage électrique
- Vue éclatée et pièces de rechange
36
Operating the Pizza Oven
Flame thrower ignition
1. Read and complete PRE-OPERATING checklist.
2. Make sure all control knobs are set to o.
3. Always light Pizza Oven with doors open.
4. Turn fuel supply on.
5. Push in, turn the control knob counter-clockwise to
the ignition point and hold for 3 seconds until the
burners ignite. It will immediately be on high.
6. Once the Pizza Oven is lit, adjust the intensity of the
ame using the control knob.
OFF
Ignition
Point
High
Temperature
Low
Temperature
1. Back Burner
2. Bottom Burner
3. Viewport