Installation Guide

10
Never let your gas hose touch your burner box
The underneath of your Pizza Oven gets incredibly hot. Pushing your excess gas line into the cavity
below your Pizza Oven, or coiling it beneath the burner box can melt the exterior coating of the gas
hose and cause a re. Take these steps to make sure your hose is positioned safely:
1. Ensure your Pizza Oven is o and cooled down.
2. Kneel and look in the cavity for the hose at the left-hand side of the Pizza Oven.
3. If the hose is bunched up, or touching the rebox, pull the gas hose from the bottom of the cabinet until
any excess line is removed.
4. Check the hose for signs of melting or damage. If the damage has occurred, or you are unsure of how to
check, contact Customer Support Team > 1-877-306-8930; or [e-mail]
Safe Operating Practices
For Pizza Oven Built-in
WARNING
The leak test must be done before initial use, annually, and whenever any gas components are
replaced or serviced. Do not smoke while performing this test and remove all sources of ignition.
See Leak Testing Diagram for areas to check. Never conduct a leak test using re or ame. Sparks
or open ames will result in a re or explosion, damage to property, serious bodily injury, or
death.
For Pizza Oven Built-in