Installation Guide

45
M6x45mm
Flat head
screws
M6x50mm
screws
M6x60mm
screws
A B
Bracket
Installing NewAge Side Burner
Installing the Side Burner on individual Side Burner cabinet
Place the Side Burner appliance
onto the cabinet.
NOTE: To install Side Burner from bottom, Open
the cabinet door. Partially loosen the screw
mounted onto the brackets (A). Adjust height
of the bracket and level the Side Burner base so
it rest properly on bracket (B). Then tighten the
Screws.
Use two M6X12 ange hex head
screws (supplied with cabinet) to
secure the Side Burner from bottom.
To add an additional cabinet, attach both the cabinets using two M6x60mm bolts
through top mounting holes and two M6x50mm through bottom mounting holes.
Follow same to install additional cabinet on otherside, else use two at head screws to
secure Side Burner to cabinet on open end.
1 2
3