Installation Guide

27
Make sure the plumbing line (Cold/Hot water lines and drain pipe) are located underneath
or behind the back wall of the cabinet, aligned with the three pre-slotted holes at the
bottom of the cabinet. Follow Steps 1a or 1b as per the location of the plumbing lines.
Locate the 3 pre-slotted holes at the back wall of the cabinet for the plumbing lines.
Using tin snips cut small webs to release the knockouts.
Locate the 3 pre-slotted holes at the bottom of the cabinet for the plumbing lines.
Using tin snips cut small webs to release the knockouts.
Preparing the Sink Cabinets
Backview of Sink Cabinet
Bottom view of Sink Cabinet
1a
1b