Installation Guide

20
1 X Measuring Tape
1 X Pencil
Hammer drill
and bit
6 X Tapcon Screws
2 X Hold down Brackets
6 X Wood Screws
1 x Marking Template
Wall Or Structure
Floor
Wall Or Structure
Floor
Installing Anti-Tipping Brackets
Parts Needed
Position the Marking Template on
the oor to where the rear foot of the
cabinet should be installed.
Drill Floor in marked positions
with appropriate drill for substrate
Mark 6 drill locations using template to
place brackets
Fasten each Anti-Tipping Bracket with 3
Tapcons into concrete surfaces or 3 wood
screws for wood surfaces.
Slide cabinet into the Anti-Tipping
Brackets until both rear foot are engaged
to secure cabinet.
1
2 3
4
5