User Guide

63
103876-08 - 1/19
CL
Installation & Service Manual
CARLIN OIL BURNER PART NUMBERS FOR CL SERIES BOILERS
NOTE: When ordering parts always give the serial and model numbers shown on the boiler and burner.
Refer to Carlin Model EZ-1/2/3 Oil Burner-Instruction Manual (Form #MNEZ123) for an exploded view of the
burner and a list of spare parts.
For replacement Carlin oil burner parts, contact your wholesaler or the burner manufacturer:
CCT, Carlin Combustion Technology, Inc.
126 Bailey Road
North Haven, CT 06475
Telephone: [phone]
Table 14C: Carlin EZ-1HP and EZ-2HP Burner Specifications
Boiler
Series
Firing Rate
GPH
Burner
Model
Settings Nozzle
3
Pump
Pressure
Head Bar Air Band GPH x Angle Type
4 2
Shipped
CL3-091 0.65
EZ-1HP
0.50 0.55 0.55 x 70B
p Loose
150
CL3-105 0.75 0.60/0.65 0.60 0.60 x 60A
p Loose
p CL3-140
1.00 0.85/1.00 0.75 0.85 x 60B Installed
CL4-126 0.90
EZ-1HP
0.75 0.75 0.75 x 60A
 Loose
150
CL4-175 1.25 0.85/1.00 1.00-1.10 1.00 x 60A
 Loose
 CL4-210
1.50 1.10/1.25 1.25-1.35 1.25 x 60B Installed
CL5-168 1.20 0.85/1.00 0.90 1.00 x 60B Installed 150
CL5-245 1.75 EZ-2HP 1.50 1.75 1.50 x 60A Installed 150
2
Nozzle(s) and Head Positioning Bar Kit for alternate boiler series firing rate(s) are shipped loose in bag attached to the
burner designated by corresponding symbol, i.e. (
p) = CL3-140.
3
Single stage fuel pump is standard, two stage fuel pump is optional. Burner manufacturer has preset single stage fuel
pump to settings shown in table above.
4
All burners utilize Delavan nozzle unless otherwise specified.
11 Burner Specifications (continued)