Specifications
CAUTION - PLEASE READ!
MEDICAL EQUIPMENT
OTHER WARNINGS
8
7
6
5
1 2 3 4
Click to “Continue ”
Select “is fast
blinking(0.5s/time)”
▶ Easy Mode ◀
Wait for it’s 100%
(LED stays in green 3 seconds.)
100%
V2.0
Mini Outdoor Dimmer P...
APP Connection
Note:
QR code Minoston
Amazon-Echo Google-Home
1. Please scan the QR code to download the application “Minoston”.
2. If you cannot download Smart Life app, please search “Minoston” on
Google Play (for Android phone) or Apple Store (for iOS phone) to
download.
3. The smart switch can be also used with Amazon Echo and Google
Home. Please scan the QR code below and follow the instructions if
you have any trouble pairing with them.
Aer you download the Minoston App and register a new account,
please follow the instructions below to set up your smart switch.
Your device needs to be installed in the network coverage of your home
router.
Note:
1) Our products supports Bluetooth quick-fit and 2.4GHz Wi-Fi network.
2) 3 connection network modes: Bluetooth quick-fit Mode, Easy Mode, AP
Mode. Choose the most suitable mode to configure the network.
within the 3 minutes.
5) If you failed to connect with Wi-Fi network, please try to operate
several times more.
3) Please operate quickly when the sky-blue LED indicator blinks rapidly.
4) When indicator flash enters the network, complete standard operation
The Minoston N3002 is a 300W MAX Loading smart dimmer plug
designed for use seasonal and landscape lighting, porch light, and
other indoor and outdoor plug-in small appliances. It's compatible
with dimmable LED, halogen, incandescent, and fluorescent bulbs.
operate your devices in your home.
Works with Amazon Alexa, Google Assistant. You can use the free
App--Smart Life, or voice control by Alexa and Google Assistant to
Introduction
Power: 120VAC, 60Hz
Specifications
Loading : 300W
Wireless Frequency: 2.4GHz
Wireless Standard: IEEE802.11b/g/n
Overloading
Warning
Overloading protection is protection against
overheating of the protected equipment. When the
device's temperature is high, the LED will light up in
red and cut down the power. Please power off the
device and use it aer the temperature of the device
drops.
When the LED is purple (AP mode), please press the
button 3 times quickly until the LED change to
Sky-blue
and LED blinks--Back to EASY MODE.
NOTE:
Do not plug an extension cord in this smart plug.
2. Turn on your Phone bluetooth. 3. Tap ‘+’ to add this plug
in the “Minoston”.
3
▶ Bluetooth quick-fit Mode ◀
• White LED indicator
1
The auto-connection comes with led
blinks. The LED will blinks 3 minutes. If it
stopped, please hold the button 5 seconds
until the LED blinks again.
1: Plug-in the device directly
to the wall outlet.
Once pluged in, it will enter into the
Buletooth auto-connection mode.
7
64 5
8
Mini Outdoor Dimmer P...
4: You'll see “Devices to be
added”---“Go to add”.
5: Click to “Add ”
6: Enter the Wi-Fi Password (Your
7: Wait for the app to connect to
phone should have connected
to the same Wi-Fi first).
your Wi-Fi until it’s 100%.
8: Click and edit the name of
switch!
When the
Bluetooth is off,
APP will remind:
“You are advised to
enable Bluetooth”.
Tap ‘+’ to add a
device in your app
Select “Electrician ”-
“Socket (Wi-Fi)”
Enter the Wi-Fi
Password
Press the button 3 times
quickly until “sky-blue”
LED blinks rapidly.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must acceptany interference received, including interfer
ence that may cause undesired operation.
changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment gener
ates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interfer
ence will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
FCC warning:
Adjust the brightness
of the light.
SETTING
For better performance of
the LED, please set a
maximum /minimum-
brightness value. When the
bulb is at this maximum
/minimum brightness
value, the bulb does not
flicker. The minimum
brightness of different
bulbs may be different.
Locks for the minimum/
maximum value
This device (
N3002
) is intended for installation in accordance with the
National Electric Code and local regulations in the United States, or the
Canadian Electrical Code and local regulations in Canada. If you are
Please DO NOT use this plug to control Medical or Life Support equip
ment. This device should never be used to control the On/Off status of
Risk of Fire
Risk of Electrical Shock
Risk of Burns
• Restores State aer Power Failure (This parameter can access you to
set the plug to be on/off aer power failure.)
Value=0 The plug is OFF regardless of the state prior to power failure.
Value=1 The plug is ON regardless of the state prior to power failure.
Value=2 (default) Memory state before power failure This switch will be
return to state prior to the power failure aer power is restored.
Operation: Quickly press button 8 times.
Please note: the switching of each value is in order, a quick press button
8 times will switch once. eg: Switching from value 0 to value 2 needs 2
switchings.
• Light off State Setting (This parameter can access you to set the light fade
out or off immeditaly.)
Value=1 (default) Fade out
Value=2 Instantaneous off
Operation: Quickly press button 10 times
Please note: the switching of each value is in order, a quick press button 10 times
will switch once. eg: Switching from value1 to value 2 needs 1 switching.
• N3002 •
Wi-Fi Smart Plug Dimmer
™
www.newonetree.com
Our Products warrants this product to be free from manufacturing defects for a
period of one year from the original date of consumer purchase. This warranty is
limited to the repair or replacement of this product only and does not extend to
consequential or incidental damage to other products that may be used with this
product. This warranty is in lieu of all other warranties, expressed or implied. Some
states do not allow limitations on how long an implied warranty lasts or permit the
exclusion or limitation of incidental or consequential damage, so the above
limitations may not apply to you. This warranty gives you specific rights, and you
may also have other rights which vary from state to state.
Warranty
Program button:
Press 1x: On/Off
Press 3x: WiFi network configuration.
Hold the button: Ajust brightness
RGB LED indicator:
Sky-blue: Network configuration mode
Blue: Light status indicator
Red: Network Failure/Overloading Warning
P
urple:
AP Network configuration mode
SIZE: 210 X 275 mm
材质：80G 书写纸
折法：风琴页 35 x 68.8 mm 成品
N3002 说明书
Canadian Electrical Code and local regulations in Canada.
Medical or Life Support equipment
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated withminimum distance 20cm between the radiator & your body.