User's Manual

www.maxiclimber.com
3. ASSEMBLY
MaxiClimber® can be assembled in 15 minutes by only one person. Screws and nuts only need to be tighten with the wrench (part G). When assembling the MaxiClimber® follow these instructions:
(1) Insert 2 screws (part I) in the larger “U” bar (part D). Place washers (part J) and nut
(part H), screw (part I) on and tighten with wrench (part G). Make sure it’s tightened. See picture.
(2) Insert 2 screws (part I) in the small “U” bar (part E). Place washers (part J) and nut (part H)
screw on and tighten with wrench (part G) . Make sure it’s tightened. See picture.
EN5