Assembly Manual

OREP Assembly Manual 776-91-04-REV-.docx

THE INFORMATION CONTAINED HEREIN IS PROPRIETARY TO NEW CENTURION SOLUTIONS, INC. AND SHALL NOT BE REPRODUCED OR

DISCLOSED IN WHOLE OR IN PART FOR ANY DESIGN OR MANUFACTURE EXCEPT WHEN SUCH USER POSSESSES DIRECT, WRITTEN

AUTHORIZATION FROM NEW CENTURION SOLUTIONS, INC.

Step 3: Insert the panel receptacle (H) into the inside of the front enclosure with the pins facing

out. Rotate the nut (with the text facing outwards) clockwise around the receptacle until it is flush

against the bottom enclosure.

Step 4: Take the bulkhead RF cable (F) and remove the nut and washer. Insert the bulkhead into

the inside of the front enclosure with the pin facing out. Fasten the washer to the bulkhead

(outside of the enclosure) and rotate the nut clockwise until it is flush against the bottom

enclosure.

Step 3

Step 4