Operation Manual

NZR 1.5 A1

│

9 ■

5) Once the interdental space appears suﬃciently clean,

release the operating button 5. The appliance stops.

6) Pull the cleaning attachment 2 out of the interdental space

and continue cleaning with the next interdental space.

NOTE

► Divide your jaw into 4 quadrants. Once you have

cleaned all the interdental spaces in one quadrant, rinse

the cleaning attachment 2 under running water.

7) After completing the cleaning session, rinse the cleaning

attachment 2 thoroughly under running water. Hold the

appliance so that the cleaning attachment 2 is pointing

downwards and the water ﬂows over the cleaning attach-

ment.

If you want to remove and dispose of the cleaning attachment 2:

1) Remove the appliance head 1 by turning it a little so that

point on the appliance head 1 is aligned with the

symbol on the hand set 4. You can then remove the

appliance head 1.

2) Pull the cleaning attachment 2 oﬀ the attachment ﬁtting 3.

If it is attached too ﬁrmly, use the removal tool on the storage

box 8.

3) To do this, push the cleaning attachment 2 all the way

through the opening in the storage box 8 and move the

hand set 4 together with the appliance head 1 in the

direction of the arrow:

This will remove the cleaning attachment 2 from the

attachment ﬁtting 3 and it will fall oﬀ.

IB_290413_NZR1.5A1_DK.indb 9 19.05.17 11:53