Operation Manual

NZPS 3 A1

│

9 ■

Plaque and stain remover

Use the plaque remover 9and the stain remover 0 to remove stains and plaque from

the teeth.

1) Remove the protective cap.

2) Guide the tip of the plaque remover 9or the stain remover 0 onto the aﬀected

area. Start with the part of the tooth closest to your gums. Now guide the tip

towards to end of the tooth. Repeat the process until the plaque or stain has been

successfully removed.

3) Replace the protective cap.

Cleaning

CAUTION

Damage to the appliance!

► To avoid irreparable damage, ensure that no moisture penetrates the appliance

during cleaning.

■ Clean the surfaces of the appliance and the accessories with a damp cloth moistened

with a standard commercial denture cleaning ﬂuid.

■ To clean the polishing cap 2, remove it as described in the section “Removing the

polishing cap”. Rinse the polishing cap 2 under running water. Allow the polishing

cap 2 to dry before screwing it back onto theattachment thread 1. We recommend

cleaning the polishing caps 2 in a standard commercial denture cleaning ﬂuid

every 2 – 4 weeks.