Operation Manual
NZPS 3 A1
■ 8
│
GB
│
IE
│
NI
Polishing teeth
NOTE
► We recommend using the appliance in front of a mirror so that you can guide the
appliance more confidently and avoid injuring your gums.
► It is normally sufficient to use the appliance twice a week. Use of the appliance
does not replace daily brushing with a toothbrush.
► Do not use appliance on your gums.
1) Add a little standard commercial toothpaste or a special polishing toothpaste to
the polishing cap 2. Use the polishing cap 2 to spread the toothpaste onto the
area to be polished.
2) Press the operating button
3. The polishing cap 2starts moving.
3) Move the appliance in a circular motion up and down to polish the tooth.
Polish each tooth for approx. 20 – 30 seconds.
4) Release the operating button
3 when you want to stop cleaning. The
appliance stops.
NOTE
► Never apply force when using the appliance. If you experience discomfort during
one polishing phase, move on to a different area.
Using the accessories
NOTE
► Do not use the accessories on your gums.
Dental mirror
Use the dental mirror 7to discover stains or plaque in hard-to-reach areas. Preferably,
use the dental mirror 7 in combination with the appliance and the other accessories.
Interdental cleaner
Use the interdental cleaner 8 to remove contamination from between the teeth.
1) Guide the tip of the interdental cleaner 8into the interdental space you want to
clean from the outside. As the tip is long enough, you do not need to clean the
interdental spaces from the behind as well.
2) Move the interdental cleaner 8 back and forth to clean the entire side surface of
the neighbouring teeth.