XLR Part Number Guide
www.neutrik.com 39
 Accessories Technical Data
Number of contacts        3 - 5  3  3 - 5  3  3 - 7  3  3
Contact resistance   
≤
6 mΩ            
Insulation resistance  - initial: 
>
 10 GΩ         
  - after damp heat test: 
>
 1 GΩ         
Dielectric strength    1.5 kV dc   
      
 
Rated voltage   
<
 50 V ac   
      
 
Rated current per contact      
  3 pole:  6 A   
        16 A  1 A  16 A
  4 pole:  6 A   
 -  - 10 A  -  -
  5, 6 pole:  3 A   
 - 
 - 7.5 A  -  -
  7 pole:  5 A   
- - - - 
 -  -
Combo XLR + Jack contact    7.5 A
- - - - - - -
Capacitance between contacts     -
  3 pole: 
≤
4 pF         - ≤ 4 pF  ≤ 4 pF  ≤ 4 pF
  4, 5, 6 pole: 
≤
7 pF   
 -  -  -  -
  7 pole: 
≤
9 pF   - - - -  
- -
Lifetime   
>
 1`000 mating cycles   
        
Insertion / withdrawal force   
≤ 
20 N            
Retention method       
  - standard:  latch lock   
      
 
  - "0" Version: 
≥ 
20 N separating force   
      
- -
Crimp XX:    0.22 - 0.34 mm
2
/ AWG 24 - 22  -  -  -  -  -   -
1) :  B Series 3 pole connectors > B-screw, 4 & 5 pole versions > A-screw
2)
 :  4 + 5 pole A series, 5 pole B series
Operating temperature    -30 °C to +80 °C               
Protection class    IP 40               
Flammability    UL 94 HB               -
 UL 94 V-0    3 pole - 3 pole  - - - 
Solderability complies with    IEC 68-2-20               
Mounting screw        A A 1) -  -  -  -
Color coding       
ACR* 
2)
 - ACR* 
2)
 DSS DSS DSS DSS
(4 + 5 pole only)   
  Specification      A  AA  B  D  DL / DLX  DLX  DLX-HE
Series Series Series Series Series Crimp Series
Electrical
Mechanical
Material
Environmental
Insert Polyamide  PA 6.6 30% GR            PSS 40% GR
Shell  Zinc diecast ZnAI4Cu1   
- - -    
 
Shell plating    gal Ni or black Cr   
- -      
 velour Cr
Ring  Zinc diecast ZnAI4Cu1   
- -  - - - -
Contacts  - female 3 pole:  Bronze CuSn6   
         
 
4 – 5 pole:  Bronze CuSn6   
 - - - - - -
  4 – 7 pole:  Brass CuZn39Pb3   
- - - - 
 -  -
  - male:  Brass CuZn35Pb2   
         
 
Contact surface   gal 0.2 µm AuCo over 2 µm NiP15 (Tribor 
®
)     - - - 
  gal 2 µm Ag or gal 0.2 µm Au hard alloy over 2 µm Ni    -  -  -       -
Latch lock & spring    Ck 67 steel, treated   
           










