XLR Part Number Guide

setting standards
26
Technical Data Technical Data
Shell Zinc diecast (ZnAI4Cu1)   -    
Stainless steel - - - - - - -
Shell plating
gal Ni or black Cr
  -
velour Cr
  
Insert Polyamide PA 6.6 30% GR    PPS 40% GR
  
Contacts - female 3 pole: Bronze (CuSn8)    Brass
  
- female 4 – 7 pole & male: Brass (CuZn39Pb3)      -
Contact surface Silver gal 2 µm Ag  - - -   
or Gold gal 0.2 µm Au hard alloy over 2 µm Ni      -
Latch lock St3K32 (latch) / Ck 67 (spring) - - - - - - -
Zinc diecast (ZnAI4Cu1) / CK67 (Spring)       
Strain-relief clamp POM       
Bushing PA / PU       
Circumferential ground spring Bronze (CuSn6), Ni plated -  - - - - -
Crimp ferrule Brass (CuZn39Pb3), Ni plated - - - - - - -
Coding ring Polyamide PA 6 15% GR - - - - - - -
Sealing jacket EPDM - -
 - - - -
Securing ring Brass (CuZn39Pb3) - - - - - - -
Lifetime
>
1`000 cycles
      
Insertion / withdrawal force
≤
20 N 
≤
50 N
    
Cable O.D. range
3.5 - 8.0 mm

2)
 6.0 - 8.0 mm
   
Max. wire size 3 pole: 2.5 mm
2
/ AWG 14  AWG 20    -
4 pole: 1.5 mm
2
/ AWG 16  - - -  - -
5, 6, 7 pole: 1.0 mm
2
/ AWG 18  - - -  - -
Crimp tool:
6.5 mm Hex die (size "E" acc. to IEC 60352-2) - - - - - 
-
Crimp XX: 0.22 - 0.34 mm
2
/ AWG 24 - 22 - - - - - 
-
Number of contacts 3 - 7
1)
3 3 3 3 - 7 3 3
Contact resistance
≤
3 mΩ       
Insulation resistance - initial:
>
10 GΩ       
- after damp heat test:
>
1 GΩ       
Dielectric strength 1.5 kV dc       
Cable shield-shell connection choosable  -     
determined - capacitive - - - - -
Shielding effectiveness
>
55 dB @ 1.3 GHz
-  - - - - -
Lossy ferrite bead on PIN 1 -
 - - - - -
Rated current per contact
@ 35°C
3 pole: 16 A
 5 A    1 A 
4 pole: 10 A  - - -  - -
5, 6 pole:
7.5 A  - - -  - -
7 pole: 5 A
 - - -  - -
Capacitance between contacts
3 pole:
≤
4 pF
      
4, 5, 6 pole:
≤
7 pF  - - -  - -
7 pole:
≤
9 pF
 - - -  - -
Rated Voltage
<
50 V ac
      
Operating temperature
-
30 °C to
+
80 °C       
Flammability UL 94 HB    V-0   
Protection class IP 40   IP 67    
Solderability complies with IEC 68-2-20       
Manufacturing Standard IEC 61076-2-103       
Specification
XX &
EMC XX-HD XX-HE RX XX Crimp
convert-
XX-14
&
Series Series Series Series Series
CON
CRYSTAL Series
Electrical
Mechanical
Material
Environmental
1)
: XX-14, CRYSTAL: 3 pole
2)
: XX-14: Cable O.D. 8.0 – 10.0 mm