Circular Connectors 119
i n n o v a t i v e Content s o l u t i o n s Page powerCON TRUE1 Series ............................................. 122 Ordering Information ................................................ 123 Accessories ................................................................ 123 powerCON Series ...................................................... 126 Ordering Information ................................................ 127 Accessories ................................................................
s u p e r i o r q u a l i t y Introduction The Neutrik ® circular connector program is a range of metal, multi-pole connectors specifically designed for industrial applications. These series provide a variety of male and female cable connectors and receptacles that can be terminated by soldering and crimping or to printed circuit boards. An easy to use and reliable quick-lock system ensures a perfect connection and cannot be released accidentally.
p o w e r C O N UL recognized Ergonomic quick lock Bushing with secure key and sealing Overmolded ready made cable Screw terminals 1/4" flat tabs ENEC certified NAC3FX-W NAC3MX-W Ø 25 [0.94“] Ø 26.5 [1.043“] powerCON TRUE1 – Lockable 16 A single phase connector NAC3FPX NAC3MPX 71-75 [2.80-2.95“] NAC3PX 81.1 [3.19 NAC3MPX • True mains connector with breaking capacity (CBC) Ø 26 [1.024“] • Lockable 16 / 20 A single phase connector 38.2 [1.
p o w e r C O N Ordering Information Cable Connector NAC3FX-W Mains cable connector, female CBC, screw terminals, IP 65 NAC3MX-W Mains cable connector, male CBC, screw terminals, IP 65 Chassis Connector NAC3FPX Mains NAC3FPX-ST Mains NAC3MPX Mains NAC3PX Mains chassis chassis chassis chassis connector female CBC, 1/4" flat tab terminals, power outlet connector female CBC, screw terminals, power outlet connector male CBC, 1/4" flat tab terminals, power inlet duplex, 1/4" flat tab terminals Accessories
p o w e r C O N Specification READY-MADE POWER CORDS Ready-made overmolded power cord in protection class IP65. The cable utilizes standard duty cord with 3 conductors with cross section 1.5 mm 2 or 12 AWG. Cables are equipped with Neutrik TRUE1 powerCON NAC3FXW and NAC3MXW for extention cables or with an open end for termination of local connectors for "power in" supply cables. Overmolded local connectors on request. Cables are available in different lengths.
p o w e r C O N Cable Part Number Breakdown N K P F - X - Y - 3 Neutrik Power Cord LENGTH in m F ............ NAC3FXW M ........... NAC3MXW CABLE TYPE A ........... H07RN-F3G1.5 B ............ H05VV-F3G1.5 C ............ SJTOW 12AWG D ............ SJOOW 12AWG TERMINATION 2. END M ........... NAC3MXW NC ..........
p o w e r C O N Quick lock Neutrik hologram 3/16" flat tabs Locking area on chassis connector powerCON – Locking 3 Pole Power Connectors NAC3FCA NAC3MPA-1 NAC3FCB • Lockable 3 pole equipment (AC) connector with contacts for NAC3MPB-1 NAC3FCA(B) line, neutral and premating safety ground • High current capacity, rated at 20 A / 250 V ac • Colour coded for easy identification, powerCON offers power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating
p o w e r C O N Ordering Information NAC3FCA Cable connector, quick lock with securing lever, A-type for power inlet, screw terminals NAC3MPA-1 Air tight chassis connector, A-type for power inlet, flat tab terminals, blue NAC3MPA-1-WOT Chassis connector, power-out, 3/16'' flat tab terminals, blue, without insulation divider NAC3FCB Cable connector, quick lock with securing lever, B-type for power outlet, screw terminals NAC3MPB-1 Air tight chassis connector, B-type for power outlet, flat tab terminals,
p o w e r C O N powerCON Robust metal housing Screw-type terminals powerCON 32 A Connectors NAC3FC-HC • Locking single phase AC appliance coupler NAC3MP-HC NAC3FC-HC • High current capacity (32 A rated) • Fast and easy locking system • Excellent cable handling and protection • Extremely robust and reliable • 250 V ac, 32 A single-phase (for ambient temperatures up to 35 °C) • Premating contact for protective earth • Locking system to prevent unintentional disengagement NAC3MP-HC • Cable O.D.
T e c h n i c a l D a t a p o w e r C O N Specification powerCON powerCON 32 A powerCON TRUE1 Series Series Electrical Number of contacts 2 + PE Rated current per contact 20 A rms 1) Rated voltage 250 V ac Dielectric strength 4 kV ac ≤ 3 mΩ Contact resistance 20 A rms 32 A rms > 0.1 GΩ Insulation resistance after damp heat test (IEC 68-2-30) Mechanical Retention method Quick lock Cable O.D.
n a n o C O N nanoCON Connector locking PCB receptacle Panel mount receptacle nanoCON – 3 Pole Subminiature Connectors NSC3F NP3F-H • World's smallest circular lockable multipole connector NP3M-V NR3M-S NSC3F(M) • Robust metal housing with gold plated contacts • Male and female receptacles for vertical or horizontal PCB mount or solder termination • Cable connector and receptacle with interchangeable male and female inserts NR3F(M)-S • Reliable and versatile in applications like medical e
n a n o C O N Ordering Information Female Male NSC3F NR3F-S NP3F-H NP3F-V NSC3M NR3M-S NP3M-H NP3M-V Cable connector, chuck principle, solder contacts Chassis connector panel mount, solder contacts Chassis connector horizontal PCB mount Chassis connector vertical PCB mount Cable connector, chuck principle, solder contacts Chassis connector panel mount, solder contacts Chassis connector horizontal PCB mount Chassis connector vertical PCB mount Ordering Information for modular nanoCON system NSC3F
m i n i C O N miniCON Push Pull locking Gold solder contacts Horizontal PCB mount miniCON – 12 Pole Miniature Connectors MSCM12 MMC* (modular system) • Up to 12 pole miniature connector MRF12 MPF(M)12-V • Complete set or modular system • Push-pull self-locking system • Precisely machined, rugged all metal design • Fully loaded male and female receptacles for horizontal or vertical PCB mount • Gold plated contacts, crimp or solder, velour chromium housing MRF(M)12 • Special crimp type strai
m i n i C O N Ordering Information for complete miniCON set Complete set (consisting of housing, insert, 12 contacts and chuck for cable connector) Female Male MSCF12 MRF12 MPF12-H MPF12-V MSCM12 MRM12 MPM12-H MPM12-V Cable connector, chuck principle, solder contacts Receptacle panel mount, solder contacts Receptacle horizontal PCB mount Receptacle vertical PCB mount MSCF(M)12 Cable connector, chuck principle, solder contacts Receptacle panel mount, solder contacts Receptacle horizontal PCB mount R
n e u t r i C O N neutriCON Push Pull locking All metal housing Colored bushing available neutriCON – Versatile Circular Connectors OSC8F MC8M-Ni • Complete set or modular system for any desirable configuration ORP8F-Ni OSC8F / OSC8M • Contact configuration can be selected from 1 to 8 contacts • Special crimp type strain relief establishes an ideal circum- ferential connection of the cable shield to the connector shell as required by best EMC working practice • Precise and robust all metal housi
n e u t r i C O N Ordering Information for complete neutriCON set Complete set (consisting of housing, insert, 8 contacts and chuck for cable connector) OSC8F OSC8F-Ni OSC8M OSC8M-Ni ORP8F ORP8F-Ni ORP8M ORP8M-Ni Female cable connector, chuck principle, black housing, solder contacts Female cable connector, chuck principle, nickel housing, solder contacts Male cable connector, chuck principle, black housing, solder contacts Male cable connector, chuck principle, nickel housing, solder contacts Female pane
A s s e m b l y T o o l s Crimptool Crimptool HX-CONTACT DMC crimptool AFM8 acc. M22520/2-01 MPOS-* Modified DMC positioner (K155) Contact positioner helds contact in position when crimping. DIE-R-BNC-* Neutrik DIE's for various HEX sizes. Contact and connector assembly Crimptool HX-R-BNC Neutrik HEX crimptool ® ® n e u t r i C O N - O r d e r i n g I n f o r m a t i o n A s s e m b l y To o l s SR8A SR8B BC1 PC1 Strain relief Strain relief Female crimp contact Male crimp contact Cable O.D.
T e c h n i c a l D a t a Specification nanoCON Series miniCON Series neutriCON Series Electrical Number of contacts Rated current per contact Rated voltage Dielectric strength Contact resistance 3 2A 50 V ac 1000 V dc ≤ 12 mΩ > 1 GΩ Insulation resistance after damp heat test (IEC 68-2-30) 12 (1-12 modular system) 3A 50 V ac 1000 V dc ≤ 8 mΩ > 500 MΩ 8 (1-8 modular system) 7.5 A (solder), 5 A (crimp) 50 V ac 1500 Vdc ≤ 5 mΩ > 500 MΩ Mechanical Retention method Cable O.D.
138 innovative solutions I superior quality
