Quick Start Guide

©NeuroTek 2020
Wireless Pulsers Quickstart Guide
Charging the Wireless Pulsers
Turning on Wireless Pulsers and Battery level
The LEDs on the wireless
pulsers are also the ON/
OFF buttons. Press and
hold until the green light
stays on. Lights will
indicate a need for
charging by ashing.
The Wireless Pulsers can be used with the Advanced and De-
luxe Tacs. The Charging Base can also power other devices.
Plug adapter into
the Pulser base
Base can be used to
charge other devices
©NeuroTek 2020
©NeuroTek 2020
Wireless Pulsers Quickstart Guide
Charging the Wireless Pulsers
Turning on Wireless Pulsers and Battery level
The LEDs on the wireless
pulsers are also the ON/
OFF buttons. Press and
hold until the green light
stays on. Lights will
indicate a need for
charging by ashing.
The Wireless Pulsers can be used with the Advanced and De-
luxe Tacs. The Charging Base can also power other devices.
Plug adapter into
the Pulser base
Base can be used to
charge other devices
Place pulsers on the base to
charge. These lights are solid
red while charging, and are solid
green when charged. Once the
pulsers are fully charged they
should be removed from the
charging base or lifted o the
charging pins to avoid discharge.
©NeuroTek 2020
Wireless Pulsers Quickstart Guide
Charging the Wireless Pulsers
Turning on Wireless Pulsers and Battery level
The LEDs on the wireless
pulsers are also the ON/
OFF buttons. Press and
hold until the green light
stays on. Lights will
indicate a need for
charging by ashing.
The Wireless Pulsers can be used with the Advanced and De-
luxe Tacs. The Charging Base can also power other devices.
Plug adapter into
the Pulser base
Base can be used to
charge other devices