User's Manual Supplement

Neuron-Spectrum-AM User Manual Supplemental Information
CONFIDENTIAL Neurosoft Ltd. Page 2 of 2
permitted for successful communication. Using an antenna of a different type or gain more than 2.68 dBi
will require additional testing for FCC.
5. Antenna Location and Installation
The Antenna is installed in a dedicated recess located inside the upper end of the front enclosure in
accordance with Neurosoft drawing 053201.006CB as shown in Figure 1.
Figure 1. Antenna Installation Inside Host
6. Radio Module Location and Installation
The radio module (NS-WF121) is located on the host control board. The module is soldered to the control
board on an automated line in accordance with Neurosoft assembly drawing # 053101.024SB. The control
board is installed over the antenna module inside the host front enclosure as shown in Figure 2.
Figure 2. Radio Module Installation Inside Host