User's Guide

Page 5 of 20
Neuronytics Confidential. 12/14/21
Confidential
By Tarik
2. EGG V01 USE
2.1. Power ON
2.1.1. Set-Up
Fig 2: Egg power and turn ON
Make sure the battery is charged, then press the button for at least 2 seconds will turn ON the device.
2.1.2. Led Behavior
A LED color will always be displayed when the device is ON, the color and behavior will be different
depending on which mode the device is in. further details about the LED behavior will be explained at
relevant sections.
2.2. Button actions
2.2.1. Buttons:
The product has one tactile button (tactile does not mean touch sensor but rather a light button triggered
by small forces), which can make several actions depending on how long the button is pressed, and how
many times it was pressed.